| Customization: | Available |
|---|---|
| After-sales Service: | Problems Can Be Solved Through Video, 24 Hours Onl |
| Max. Lifting Height: | 9.2m |
|
Still deciding? Get samples of US$ 14850/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
For specific product parameters, please view the table below.
| 3T Spider hanging | ||
| Product Parameters WT3.0 | ||
| Model | MS-WT3.0 | |
| Specification | 2.95T*1.3m | |
| Maximum Working Radius | 8.3m*1T | |
| Maximum Ground Lifting Height | 9.2m | |
| Maximum Underground Lifting Height | ||
| Winch Device | Hook Speed | 12m/min 4 ropes |
| Rope | φ12mm*50m | |
| Telescopic System | Boom Type | Full 5-corner automatic 5section |
| Boom Length | 2.8m-8.3m(2.5 meters 5 knots) | |
| Telescopic Length/Time | 2.8m-8.3m/25sec(During growth 20sec) | |
| Up and Downs | Boom Angle/Time | 0°-80°/18sec(During growth 16sec) |
| Slew System | Slew Angle/Time | 0°-360°(Continuous)/2.1rpm |
| Outrigger | Outrigger Active Form | Manual rotation. Hydraulic extension. Manual grounding Manual adjustment for the 1,3 section Automatic for the 2section |
| Maximum Extended Dimensions | (Left,right)5100mm*(front, back)4060mm | |
| Traction system | Walking Way | Hydraulic motor drive |
| Walking Speed | before and after0-2.5KM/h | |
| Grade Ability | 20° | |
| Ground Length*Width | 1450mm*230mm*2 strip | |
| Ground Pressure | 49.0Kpa(0.50kgf/cm²) | |
| Electric Motor | Model | Three-phase AC asynchronous motor |
| Working Voltage | 380V(HZ50) | |
| Power | 5.5KW | |
| Diesel Engine | Model | You pu2V80 |
| Emission Standard | National II | |
| Maximum Output | 5.5KW | |
| Starting Method | Electric starting | |
| Fuel | Fuel | |
| System voltage | 12V | |
| Vehicle size | Length*Width*Height | 3200mm*980mm*1750mm |
| weight | Vehicle Weight | 3T |
| 5T Spider hanging | ||
| Product Parameters WT5.0 | ||
| Model | MS-WT5.0 | |
| Specification | 5.00T*2.0m | |
| Maximum Working Radius | 16m*0.21T | |
| Maximum Ground Lifting Height | 16.8m | |
| Maximum Underground Lifting Height | ||
| Winch Device | Hook Speed | 12m/min 4ropes |
| Rope | φ12mm*80m | |
| Telescopic System | Boom Type | Hexagonal automatic 5-segment |
| Boom Length | 4.7m-16.5m(4 meters 5 knots) | |
| Telescopic Length/Time | 11.7m/45sec(During growth 38sec) | |
| Up and Downs | Boom Angle/Time | 0°-80°/24.5sec(During growth 17.0sec) |
| Slew System | Slew Angle/Time | 0°-360°(Continuous)/2.1rpm |
| Outrigger | Outrigger Active Form | Manual rotation. Hydraulic extension. hydraulic ground Manual adjustment for the 1 section Automatic for the 2,3section |
| Maximum Extended Dimensions | (Left,right)5670mm*(forward)5510mm*(back)5030mm | |
| Traction system | Walking Way | Hydraulic motor drive |
| Walking Speed | forward,back0-2.5KM/h | |
| Grade Ability | 20° | |
| Ground Length*Width | 1720mm*350mm*2strip | |
| Ground Pressure | 49.0Kpa(0.50kgf/cm²) | |
| Electric Motor | Model | Three-phase AC asynchronous motor |
| Working Voltage | 380V(HZ50) | |
| Power | 11KW | |
| Diesel Engine | Model | Yunnei 490 (National II) |
| Emission Standard | National II | |
| Maximum Output | 37KW | |
| Starting Method | Electric starting | |
| Fuel | Fuel | |
| System voltage | 24V | |
| Vehicle size | Length*Width*Height | 4600mm*1430mm*2170mm |
| weight | Vehicle Weight | 6.55T |
| 8T Spider hanging | ||
| Parameters WT8.0 |
||
| Model | MS-WT8.0 | |
| Specification | 8.00T*2.3m | |
| Maximum Working Radius | 16m*0.2T | |
| Maximum Ground Lifting Height | 17.8m | |
| Maximum Underground Lifting Height | ||
| Winch Device | Hook Speed | 12m/min 4 ropes |
| Rope | φ12mm*100m | |
| Telescopic System | Boom Type | Full automatic 5section |
| Boom Length | 4.85m-17m(4.5 meters 5 knots) | |
| Telescopic Length/Time | 17m/54sec(During growth 41sec) | |
| Up and Downs | Boom Angle/Time | 0°-80°/24.5sec(During growth 17.0sec) |
| Slew System | Slew Angle/Time | 0°-360°(Continuous)/2.1rpm |
| Outrigger | Outrigger Active Form | Manual rotation. Hydraulic extension. Hydraulic grounding Manual adjustment for the 1 section Automatic for the 2,3section |
| Maximum Extended Dimensions | about(Left,right)6400mm*(front)6100mm*(back)5300mm | |
| Traction system | Walking Way | Hydraulic motor |
| Walking Speed | forward,back0-2.5KM/h | |
| Grade Ability | 20° | |
| Ground Length*Width | 1720mm*350mm*2strip | |
| Ground Pressure | 49.0Kpa(0.50kgf/cm²) | |
| Electric Motor | Model | Three-phase AC asynchronous motor |
| Working Voltage | 380V(HZ50) | |
| Power | 15KW | |
| Diesel Engine | Model | Yunnei 490 supercharged |
| Emission Standard | National II | |
| Maximum Output | 47KW | |
| Starting Method | Electric starting | |
| Fuel | Fuel | |
| System voltage | 24V | |
| Vehicle size | Length*Width*Height | 4950mm*1560mm*2235mm |
| weight | Vehicle Weight | about 7.6T |
| 10T Spider hanging | ||
| Product Parameters WT10.0 |
||
| Model | MS-WT10.0 | |
| Specification | 10.00T*2.3m | |
| Maximum Working Radius | 17.5m*0.2T | |
| Maximum Ground Lifting Height | 19.6m | |
| Maximum Underground Lifting Height | ||
| Winch Device | Hook Speed | 12m/min 4 ropes |
| Rope | φ16mm*100m | |
| Telescopic System | Boom Type | Hexagonal automatic 5-segment |
| Boom Length | 5.55m-19m(5 meters 5 knots) | |
| Telescopic Length/Time | 19m/54sec(During growth 41sec) | |
| Up and Downs | Boom Angle/Time | 0°-80°/24.5sec(During growth 17.0sec) |
| Slew System | Slew Angle/Time | 0°-360°(Continuous)/2.1rpm |
| Outrigger | Outrigger Active Form | Manual rotation. Hydraulic extension. Hydraulic grounding Manual adjustment for the 1 section Automatic for the 2,3section |
| Maximum Extended Dimensions | about(left,right)7400mm*(front)7100mm*(back)6300mm | |
| Traction system | Walking Way | Hydraulic motor |
| Walking Speed | front,back 0-2.5KM/h | |
| Grade Ability | 20° | |
| Ground Length*Width | 2200mm*400mm*2strip | |
| Ground Pressure | 49.0Kpa(0.50kgf/cm²) | |
| Electric Motor | Model | Three-phase AC asynchronous motor |
| Working Voltage | 380V(HZ50) | |
| Power | 15KW | |
| Diesel Engine | Model | Yunnei 4102/Weifang 4108 supercharger |
| Emission Standard | National II | |
| Maximum Output | 81KW/91KW | |
| Starting Method | Electric starting | |
| Fuel | Fuel | |
| System voltage | 24V | |
| Vehicle size | Length*Width*Height | about 5450mm*1760mm*2530mm |
| weight | Vehicle Weight | about 8.5T |
Henan Maysun Machinery Co., Ltd. was founded in 2023. It is a technology-based enterprise integrating research and development, sales and service of branch crusher, copper wire granulator, pile driver and hydraulic scissor lift. Our company is located in Puyang City, Henan Province, with a beautiful environment and convenient transportation. Our company has experienced employees who are committed to strict quality inspection and attentive customer service, and are able to discuss customer needs at any time to ensure customer satisfaction. Maysun Machinery also has been committed to the field of new energy, has solved the integration of the supply quantity of pile driver for solar energy, electric pile driver, self-propelled hydraulic scissor lift, etc., to provide customers at home and abroad with the best quality products and professional services,
1.
Why choose us?
Rancheng Machinery is a very professional drilling rig supplier in China. We have rich experience in this industry for 11 years. Our products are now available all over the world. We have high quality, competitive price and fast delivery.
2.
who are we?
We are based in Henan, China, start from 2023,sell to Southeast Asia(10.00%),Africa(6.00%). There are total about 11-50 people in our office.
3.
how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
4.
what can you buy from us?
Branch crusher,hydraulic scissor lift,copper wire granulator,pile breaking machine,power trowel
5.
Do you offer any custom designs?
Yes, we have our own trading factory. We provide services to partners of the highest range. We produce an excellent product based on your designs.
6,
How to make sure the quality we sent to you is the same as what we said?
We are a gold supplier on Alibaba, order through alibaba trade assurance, ensure the safety of your money and the quality of goods.
7.
How to order?
Step 1, please tell us which model and quantity you need; Step 2, then we will make a PI for you to confirm the order details; Step 3, when we have confirmed everything, we can arrange payment; Step 4 Finally we deliver the product within the agreed time.
8.
When will delivery be made?
About 10-15 working days after receiving payment.
9.
After-sales service 1 year warranty for all types of products;
If you find any defective accessories at the first time, we will provide you with new parts for free to replace in your next order, as an experienced manufacturer, you can rest assured of the quality and after-sales service.
10,
Can we visit your factory ?
Yes, you are warmly welcome to visit us.
){kind=link}